ENG FB kontakt

21.07.2024

Strona główna Prof. dr hab. inż. Stanisław Adamczak dr h.c. - research, teaching and organizational activities

Prof. dr hab. inż. Stanisław Adamczak dr h.c. - research, teaching and organizational activities

26-04-2019

Stanisław Adamczak, BEng, PhD, DSc, ProfTit, Dr HC

mechanik@mechanik.media.pl

 

Education:

1972 – MSc, Faculty of Precision Mechanics, Warsaw University of Technology
1977 – PhD, Kielce University of Technology
1994 – PhD, University of Transport and Communications in Zilina (Slovakia), recognized in Poland in 1994 as the equivalent of a DSc and later in 1995 in Slovakia as a University-of-Zilina docent
1997 – full professorship, awarded in Slovakia; visiting professor, Vienna University of Technology
1999 – full professorship, awarded in Poland
2003 – honorary doctorate, Technical University of Kosice (Slovakia)
2003 – full professorship, permanent appointment
2007 – honorary doctorate, Sumy State University (Ukraine)
2007 – honorary doctorate, University of Zilina (Slovakia)
2009 – honorary doctorate, Technical University of Ostrava (Czech Republic)
2013 – honorary doctorate, National University of Water Management and Natural Resources, Rivne (Ukraine)

 

Experience:

1972–1977 – assistant lecturer, Kielce University of Technology
1977–1995 – assistant professor, Kielce University of Technology
1991–1994 – part-time visiting professor, University of Transport and Communications in Zilina (Slovakia)
1995 – docent, University of Zilina (the title of full professor in Mechanical Engineering awarded in recognition of his research and teaching achievements by the President of Slovakia, Michal Kovac on 7/12/1997)
1995–2000 – associate professor, Kielce University of Technology
2000–2003 – associate professor with tenure, Kielce University of Technology
2003 – present – full professor, Kielce University of Technology

 

Research interests:

  • surface texture metrology, surface texture measurement and assessment methods (form errors, position errors, waviness and roundness)
  • measurement automation, computer-aided measurement systems, computer-aided measuring instruments, dimensional analysis, quality assurance systems (ISO 9000)

 

Courses taught and other responsibilities:

  • Metrology, part-time programmes, since 1991
  • Dimensional analysis, part-time programmes, since 1992
  • Modern quality control systems, full-time programmes, since 1994
  • Metrology (lectures, lab classes), full-time programmes, since 1994
  • Metrology (lectures), full-time and part-time programmes, master’s level course within the Management and Production Engineering Programme, since 2001
  • reviewer for honorary doctorates: 6
  • reviewer for full professorship: 27
  • reviewer for a DSc degree: 40
  • reviewer for a PhD degree: 45
  • supervisor of (completed) doctoral projects: 6

 

Publications/Patents:

Total number of publications: 355

  • articles in ISI indexed journals: 20
  • articles in other journals: 94+141
  • monographs and books: 7
  • chapters in edited volumes: 20
  • editor in edited volumes: 14
  • patents and patent applications: 39

 

Citations according to the Web of Science and SCOPUS

Results found:

33

48

 

Sum of the times cited:

238

319

Sum of times cited without self-citations:

213

268

Average citations per item:

7,21

 

 

h-index:

11

11

Source: http://apps.webofknowledge.com/

 

Research projects:

  • research projects (Principal Investigator): 4
  • research and development projects (Principal Investigator): 1
  • international projects: 11
  • implementation of research findings: 15
  • 1999–2003 – research project No 4T07D00617 1.41/6.02 funded by the Ministry of Science and Higher Education (MNiSW in Polish): Theoretical and experimental fundamentals of V-block measurement for cylindrical machine parts
  • 2004–2007 – research project No. 4T07D02127 1.41/6.04 funded by the Ministry of Science and Higher Education (MNiSW in Polish): Analysis of cylindricity profiles in machine parts through combined roundness and straightness measurement. Theoretical and experimental essentials
  • 2008–2011 – research project No. NN503222935 1.41/6.08 funded by the Ministry of Science and Higher Education/National Science Centre (MNiSW/NCN in Polish): Theoretical and experimental methods for measurement and assessment of sphericity profiles in machine parts
  • 2010–2013 – research and development project No N R03 0025 10 funded by the National Centre for Research and Development (NCBiR in Polish): Development of testing methods for rolling-element bearings in accordance with the requirements for higher performance products
  • 2013–2016 – research project No PBS2/A6/20/2013 funded by the National Centre for Research Development through the Second Applied Research Programme (NCBiR – PBS 2 in Polish): Analysis and assessment of the validity and reliability of modern methods for micro- and nano-scale surface topography measurements
  • 2017–2019 – project co-funded by the Ministry of Energy and the European Union under the Intelligent Development Operational Programme: Development of concepts and solutions to prepare a documentation for the design and construction of setups to test roller-element bearings

 

Research and teaching visits:

  • 1972 – teaching assistant, Kielce University of Technology
  • 1991–1994 – part-time visiting professor, the University of Transport and Communications in Zilina (Slovakia)
  • 1995–2017part-time visiting professor, Vienna University of Technology (Austria)
  • 1995 – present – visiting professor under the international CEEPUS programme

 

Functions at the University:

1980–1991 – Deputy Head of the Division of Manufacturing Engineering
1997–2000 – Head of the Division of Manufacturing Engineering
2000–2018 – Head of the Department of Manufacturing Engineering and Metrology
2002–2008 – Dean of the Faculty of Mechatronics and Mechanical Engineering
2008–2016 – Rector of the Kielce University of Technology
1980 – present – Head of the Laboratories of Computer-Based Measurement of Geometrical Quantities

 

Membership:

  • coordinator of the CEEPUS programme to support international cooperation between the following universities: Vienna University of Technology, Technical Universities in Kosice, Bratislava, Prague, Brno and Ostrava, Universities of Zagreb, Zilina, Maribor, Rijeka, Galati, Novi Sad and Skopje
  • member of the Faculty Boards of the Faculties of Mechanical Engineering at the Technical Universities of Kosice and Ostrava and the University of Zilina; collaboration with the Slovak Academy of Sciences, visiting professor to the Vienna University of Technology since 1997
  • member of the Committee on Metrology and Research Equipment of the Polish Academy of Sciences
  • member of the Committee on Machine Building

 

Selected publications:

  • Influence of raceway waviness on the level of vibration in rolling-element bearings 20 (10.00) points
    Name of Journal: Bulletin of the Polish Academy of Sciences Technical Sciences
    Vol.: 65, Issue: 4, pp.: 541–551
    Stanisław Adamczak, Paweł Zmarzły
    Year of publication: 2017
  • Influence of temperature gradient on surface texture measurements with the use of profilometry 20 (10.00) points
    Name of Journal: Bulletin of the Polish Academy of Sciences-Technical Sciences
    Vol.: 65, Issue: 1, pp.: 53–61
    Tatiana Miller, Stanisław Adamczak, Jacek Świderski, Michał Wieczorowski, Aneta Łętocha, Bartosz Gapiński
    Year of publication: 2017
  • Estimating the approximation uncertainty for digital materials subjected to stress relaxation tests 20 (10.00) points
    Name of Journal: Metrology and Measurment Systems
    Vol.: 23, Issue: 4, pp.: 545–553
    Stanisław Adamczak, Jerzy Bochnia
    Year of publication: 2016
  • Identification and analysis of optimal method parameters of the V-block waviness measurements 20 (6.60) points
    Name of Journal: Bulletin of the Polish Academy of Sciences Technical Sciences
    Vol.: 64, Issue: 2, pp.: 325–332
    Stanisław Adamczak, Paweł Zmarzły, Krzysztof Stępień
    Year of publication: 2016
  • Sphericity measurements by the radial method: I. Mathematical fundamentals 30 (10.00) points
    Name of Journal: Measurement Science and Technology
    Vol.: 27, Issue: 1
    Dariusz Janecki, Krzysztof Stępień, Stanisław Adamczak
    Year of publication: 2016
  • Sphericity measurements by the radial method: II. Experimental verification 30 (10.00) points
    Name of Journal: Measurement Science and Technology
    Vol.: 27, Issue: 1, pp.: 015006
    Dariusz Janecki, Krzysztof Stępień, Stanisław Adamczak
    Year of publication: 2016
  • An analysis of tensile test results to assess the innovation risk for an additive manufacturing technology 20 (10.00) points
    Name of Journal: Metrology and Measurment Systems
    Vol.: XXII, Issue: 1, pp.: 127–138
    Stanisław Adamczak, Jerzy Bochnia, Bożena Kaczmarska
    Year of publication: 2015
  • Theoretical and Practical Investigations of V-Block Waviness Measurement of Cylindrical Parts 20 (6.60) points
    Name of Journal: Metrology and Measurment Systems
    Vol.: 22, Issue: 2, pp.: 181–192
    Stanisław Adamczak, Paweł Zmarzły, Dariusz Janecki
    Year of publication: 2015
  • Estimating the uncertainty of tensile strength measurement for a photocured material produced by additive manufacturing 15 (7.50) points
    Name of Journal: Metrology and Measurement Systems
    Vol.: 21, Issue: 3, pp.: 553–560
    Stanisław Adamczak, Jerzy Bochnia, Bożena Kaczmarska
    Year of publication: 2014
  • Problem of Profile Matching in Sphericity Measurements by the Radial Method 20 (6.67) points
    Name of Journal: Metrology and Measurement Systems
    Vol.: 19, Issue: 4, pp.: 703–714
    Dariusz Janecki, Stanisław Adamczak, Krzysztof Stępień
    Year of publication: 2012 
  • Stress and strain measurements in static tensile tests 20 (6.67) points
    Name of Journal: Metrology and Measurement Systems
    Vol.: 19, Issue: 3, pp.: 531–540
    Stanisław Adamczak, Jerzy Bochnia, Czesław Kundera
    Year of publication: 2012
  • Analyzing Variations in Roundness Profile Parameters During the Wavelet Decomposition Process Using the Matlab Environment 20 (10.00) points
    Name of Journal: Metrology and Measurement Systems
    Vol.: 18, Issue: 1, pp.: 25–33
    Stanisław Adamczak, Włodzimierz Makieła
    Year of publication: 2011
  • Cylindricity measurement by the V-block method – Theoretical and practical problems 25 (8.33) points
    Name of Journal: Measurement
    Vol.: 44, Issue: 1, pp.: 164–173
    Stanisław Adamczak, Dariusz Janecki, Krzysztof Stępień
    Year of publication: 2011 
  • Determining the theoretical method error during an on-machine roundness measurement 25 (6.25) points
    Name of Journal: Measurement
    Vol.: 44, Issue: 9, pp.: 1761–1767
    Adam Janusiewicz, Stanisław Adamczak, Włodzimierz Makieła, Krzysztof Stępień
    Year of publication: 2011 
  • Investigating the influence of selected factors on results of V-block cylindricity measurements 25 (8.33) points
    Name of Journal: Measurement
    Vol.: 44, Issue: 4, pp.: 767–777
    Krzysztof Stępień, Dariusz Janecki, Stanisław Adamczak
    Year of publication: 2011
  • Statistical validation of the method for measuring radius variations of components on the machine tool 20 (5.00) points
    Name of Journal: Metrology and Measurement Systems
    Vol.: 18, Issue: 1, pp.: 35–46
    Stanisław Adamczak, Adam Janusiewicz, Włodzimierz Makieła, Krzysztof Stępień
    Year of publication: 2011
  • Problems of measurement of barrel- and saddle-shaped elements using the radial method 27 (9.00) points
    Name of Journal: Measurement
    Vol.: 43, Issue: 5, pp.: 659–663
    Dariusz Janecki, Krzysztof Stępień, Stanisław Adamczak
    Year of publication: 2010
  • Qualitative and quantitative evaluation of the accuracy of the V-block method of cylindricity measurements 32 (10.67) points
    Name of Journal: Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology
    Vol.: 34, Issue: 3, pp.: 619–626
    Stanisław Adamczak, Dariusz Janecki, Krzysztof Stępień
    Year of publication: 2010
  • A model of surface roughness constitution in the metal cutting process applying tools with defined stereometry 10 (5.00) points
    Name of Journal: Strojniski Vestnik-Journal of Mechanical Engineering
    Vol.: 55, Issue: 1, pp.: 45–54
    Stanisław Adamczak, Edward Miko, Franc Cus
    Year of publication: 2009 
  • The infrared measurement of form deviations of machine parts in motion 20 (6.67) points
    Name of Journal: Measurement
    Vol.: 40, Issue: 1, pp.: 28–35
    Stanisław Adamczak, Tadeusz Orzechowski, Tomasz Lech Stańczyk
    Year of publication: 2007

 

International conference proceedings (indexed by the Web of Science):

1. Assessment of the Accuracy of Laser Vibrometer for Measurement of Bearing Vibrations
Name of Journal: Proceedings of the International Symposium for Production Research 2018
Stanisław Adamczak, Mateusz Wrzochal
Year of publication: 2018

2. The Evaluation of a Contact Profilometer Measuring Tip Movement on the Surface Texture of the Sample
Name of Journal: Proceedings of the International Symposium for Production Research 2018
pp.: 333–342
Paweł Zmarzły, Stanisław Adamczak
Year of publication: 2018

3. A concept of an application of couples comparing method to the comparison of roundness profiles 15 (5.00) points
Name of Journal: Procedia Engineering
Vol.: 192, Issue: 192, pp.: 4–9
Urszula Kmiecik-Sołtysiak, Krzysztof Stępień, Stanisław Adamczak
Year of publication: 2017

4. Analysis of the dimensional accuracy of casting models manufactured by fused deposition modeling technology 15 (3.75) points
Name of Journal: 23rd International Conference Engineering Mechanics 2017
pp.: 66-69
Stanisław Adamczak, Paweł Zmarzły, Tomasz Kozior, Damian Gogolewski
Year of publication: 2017

5. Assessment of roundness and waviness deviations of elements produced by selective laser sintering technology 15 (3.75) points
Name of Journal: 23rd International Conference Engineering Mechanics 2017
pp.: 70–73
Stanisław Adamczak, Paweł Zmarzły, Tomasz Kozior, Damian Gogolewski
Year of publication: 2017

6. Assessment of the state of the geometrical surface texture of seal rings by various measuring methods 15 (5.00) points
Name of Journal: IOP Conf. Series: Materials Science and Engineering
Vol.: 233, pp.: 012031
Czesław Kundera, Stanisław Adamczak, Jacek Świderski
Year of publication: 2017

7. Comparative study of measurement systems used to evaluate vibrations of rolling bearings 15 (3.00) points
Name of Journal: Procedia Engineering Journal Elsevier
Vol.: 192, pp.: 971–975
Stanisław Adamczak, Krzysztof Stępień, Mateusz Wrzochal
Year of publication: 2017

8. Investigation the Influence of the Curvature Ratio on the Frictional Moment in Rolling Bearings 15 (3.75) points
Name of Journal: Procedia Engineering
Vol.: 192, pp.: 255-258
Łukasz Gorycki, Stanisław Adamczak, Włodzimierz Makieła, Mateusz Wrzochal
Year of publication: 2017

9. Calculation of reference surface parameters for elements whose generatrix is a fragment of a circle 6 (2.00) points
Name of Journal: XIX IMEKO World Congress: Fundamental And Applied Metrology, Proceedings
pp.: 1953–1956
Dariusz Janecki, Krzysztof Stępień, Stanisław Adamczak
Year of publication: 2009

10. Research on accurate in situ measurements of cylindricity 6 (3.00) points
Name of Journal: XIX IMEKO World Congress: Fundamental And Applied Metrology, Proceedings
pp.: 1811–1814
Krzysztof Stępień, Stanisław Adamczak
Year of publication: 2009

11. The Comparison of cylindricity profiles using normalized cross-correlation function
Name of Journal: 5th International Conference Measurement
pp.: 363–366
Stanisław Adamczak, Dariusz Janecki, Krzysztof Stępień
Year of publication: 2005

12. Edge effect elimination in the FIR implementation of Gaussian filters
Name of Journal: 8th International Symposium on Measurement and Quality Control in Production VDI-Berichte Nr 1860, Erlangen
Vol.: 1860, pp.: 113–121
Dariusz Janecki, Stanisław Adamczak
Year of publication: 2004

13. Investigation on possibilities of applying reference methods in accurate cylindricity measurements
Name of Journal: 8th International Symposium on Measurement and Quality Control in Production VDI-Berichte Nr 1860, Erlangen
Vol.: 1860, pp.: 719–726
Stanisław Adamczak, Dariusz Janecki, Krzysztof Stępień
Year of publication: 2004

 

Strona główna Prof. dr hab. inż. Stanisław Adamczak dr h.c. - research, teaching and organizational activities

Zamów NEWSLETTER

Kalendarium wydarzeń

Pn
Wt
Śr
Cz
Pt
So
Nd

Nasze propozycje

Metrologia geometryczna powierzchni technologicznych. Zarysy kształtu – Falistość – Mikro- i nanochropowatość.
Stanisław Adamczak

Metrologia geometryczna powierzchni technologicznych. Zarysy kształtu – Falistość – Mikro- i nanochropowatość.

Wydawnictwo Naukowe PWN

"Metrologia geometryczna powierzchni technologicznych" to kompendium poświęcone tematyce pomiarów i analizy...

Układy dynamiczne w modelowaniu procesów przyrodniczych, społecznych, technologicznych
Jacek Banasiak, Katarzyna Szymańska-Dębowska

Układy dynamiczne w modelowaniu procesów przyrodniczych, społecznych, technologicznych

Wydawnictwo Naukowe PWN

"Układy dynamiczne" to podręcznik związany z analizą układów dynamicznych, którą można zastosować w różnych...

Matematyczny wszechświat. Od Pitagorasa do Plancka
Joel L. Schiff (Tłum.: W. Sikorski)

Matematyczny wszechświat. Od Pitagorasa do Plancka

Wydawnictwo Naukowe PWN

"Matematyczny wszechświat" to wciągająca opowieść, która odkrywa przed czytelnikami prawa matematyczne...

Tarcie i smarowanie w procesach kształtowania blach
Tomasz Trzepieciński

Tarcie i smarowanie w procesach kształtowania blach

Wydawnictwo Naukowe PWN

W książce Tarcie i smarowanie w procesach kształtowania blach przedstawiono specyfikę zjawiska tarcia...

Nasi partnerzy